background image

You can use the setting timer to make the unit automatically turn on at a certain time everyday 

from standby. When the setting timer is on, the timer indicator “     ” will be displayed. But the 

clock must be correctly set for the timer to operate correctly.

26

Setting the Daily on Timer

1.

2.

3.

4.

5.

6.

7.

8.

9.

In standby mode, press and hold the timer button (

TIMER

) on the remote control, until 

[TIMER SET] scrolls on the display. Then the source is displayed (e.g. DISC).

Press the 

FM

DISC

 or 

USB

 button or VOL+/- button to select a source.

Press the 

TIMER 

button, the hour indicator will blink.

Set the hour with the 

VOL+/- 

button.

Press the 

TIMER 

button, the minute indicator will blink.

Set the minute with the 

VOL+/- 

button.

Press the 

TIMER 

button, the volume indicator will blink.

Adjust volume with the 

VOL+/- 

button.

Press the 

TIMER 

button, the timer is set and activated, and “     ” is displayed.

This unit can switch to standby mode automatically after a set period.

Activate / deactivate alarm timer

1.

In the standby mode, press TIMER button repeatedly.

If timer is activated, the      icon is displayed.

If timer is deactivated, the      icon will disappear on the display.

Set sleep timer

1.

When the unit is turned on, press 

SLEEP 

button on your remote repeatedly to select a set 

period of time (in minutes).

When the sleep timer is activated, SLEEP icon “        ” displayed. 

          OFF 

120 

90 

60 

45 

30 

15

Please Note:

To deactivate the sleep timer, press 

SLEEP

 button repeatedly on your remote 

until [SLEEP OFF] is displayed.

When sleep timer is deactivated, the “        ” will disappear for LCD screen.

Please Note:

If the USB/DISC source is selected but no device connected, the unit switches to 

TUNER automatically.

Summary of Contents for ARIES 36





































Reviews: