Handling the Remote Control
• Remove the battery if the remote
control is not going to be used for an
extended period of time.
• To avoid possible failure, read the
following instructions and handle the
remote control properly.
• Do not drop or cause impact to the
remote control.
• Do not spill water or any liquid on the
remote control.
• Do not place the remote control on a
wet object.
• Do not place the remote control in
direct sunlight or near sources of
excessive heat.
• Do not use caustic cleaners (e.g
porcelain, stainless steel, toilet, or oven
cleaner etc.) on the remote, as it may
cause damage.
10
Batteries
1.
Remove the insulating mylar strip from
the battery. It is located at the bottom
back side of the remote control.
1.
Loosen the screw on the battery
compartment cover with a screwdriver.
Pull out the battery compartment with
your fingernails.
2.
Replace a new battery (size 2025)
correctly and fully insert the battery
compartment back to the original
position. Tighten the screw with a
screwdriver.
Getting Started
Replacement of battery
