1.
2.
Press the
PROGRAM
button on the remote control, the preset number will be displayed.
Press the
PRESET
buttons on the remote control or press the buttons on unit
panel to select the preset number.
3.
4.
Press the
PROGRAM
button again to store the station. The display will return to the
broadcast frequency display.
Repeat above steps 1 to 3 for each station you want to store in memory with a preset
number.
PRESET
17
FM Radio
Preset Tuning (Available only after the stations are preset)
Repeatedly press the
PRESET
buttons on the remote control or press the buttons
on the front panel to select the desired preset number. Its band and frequency are displayed on
the Display panel.
Presetting Stations
You can manually preset up to 20 FM stations.
Tune in the desired station:
To change the FM Reception Mode
Press the
MODE
button to select the Stereo or Mono channel to receive the best FM reception
mode.
FM Display Modes
Every time you press the
DISPLAY
button, the display will cycle through the following display
modes:
Station Name, Programme Type, Clock, Radio Text, Frequency
The information is displayed on the lower segment of the display.
Station Name
When an RDS station is received, the name of that
station
Programme Type
Programme type identification signal. (E.g. News,
Rock, Classical music)
Radio Text
This displays a station description.
Frequency
This shows the frequency of the current station, e.g.
89.80 MHz.
Clock
The RDS CLOCK system may not properly operate in
areas where RDS CLOCK service is not available. Once
RDS CLOCK service is available, the RDS CLOCK
system will commence operation.
Increase the preset number by 1
Decrease the preset number by 1
/
/
/
/
PRESET
Please Note:
If the system is unplugged or if a power failure occurs, the preset stations will not
be erased after stored.
Programme Type
Radio Text
Clock
Frequency
Station Name
