Please Note!
If you will not be using the remote for
an extended perioid of time it is
advised that you remove the batteries.
Please avoid the following which may
cause your remote to fail:
• Dropping or impacting your remote.
• Spilling water or any liquid on your
remote.
• Placing your remote on wet objects
or surfaces.
• Leaving your remote in direct sunlight
or near sources of excessive heat.
• Please don’t use caustic cleaners (e.g.
porcelain, stainless steel, toilet or even
cleaner etc) on your remote as it may
cause damage to your remote.
Remote Control Operation Range
1. Point the remote control towards the
remote sensor IR of the front of the
unit.
2. Make sure that there is no obstacle
between the infrared remote sensor of
the unit and remote control.
10
Installation of Batteries
1.
Open the battery compartment.
2.
Insert 2 AAA batteries with correct
polarity (+/-) as indicated in
compartment.
3.
Close the battery compartment.
