12
13
naishkites.com
ASSEMBLY
ATTACHING FLYING LINES TO A 5-LINE KITE
1
- Begin with the flying lines from the 5-line
control system laid out directly upwind
of the kite.
WARNING:
Make sure all flying lines
are straight, completely free of tangles
and properly positioned for correct line
connection before attaching to the kite.
2
- Attach the 5
th
flying line to the 5th line
connection point.
3
- Attach both front flying lines to the front
line connection points.
4
- Attach the left steering (rear) flying line
to the left steering (rear) line
connection point.
5
- Attach the right steering (rear) flying line
to the right steering (rear) line
connection point.
WARNING:
Naish flying lines and bridles
feature foolproof connectors to reduce the
risk of incorrect connection between front
and steering (rear) line connection points.
Be sure to always use authentic Naish flying
lines and bridles when using Naish kites and
control systems.
5
th
Line
ASSEMBLY
ATTACHING LINE EXTENSIONS
Insert the loop end of the extension line through the
foolproof connector loop on the flying line as shown.
WARNING:
The loop end of the extension line
is opposite the foolproof connector end of the
extension line.
Pull the lines tight to secure the connection as shown.
Then insert the foolproof connector end of the
extension line through the loop end of the extension
as shown.
ATTACHING FOOLPROOF CONNECTORS
To create a Lark's head loop,
fold the loop over and pull the
line through the loop as shown.
Insert the knotted end of the
other line through the Lark's
head loop as shown.
Pull the lines tight to secure the
connection as shown.
Steering
(Rear)
Steering
(Rear)
Front
Front
1
2
3
1
3
2
