49
If a power failure happens, the motor will take longer time to
stop completely since the braking function will be also useless.
Please, wait patiently until the motor completely stops.
For emergency opening, proceed as follows:
4.
Confirm the motor has completely stopped;
5.
Unplug the equipment.
6.
Pull firmly and horizontally from the emergency cord; the lid will open and samples
could be extracted from the centrifuge;
7.2 Information on possible failures and problems
The below chart shows possible failures and their causes and solutions. If in spite of the
indicated recommendations the problem still persists, please contact your distributor for the
reparation through the Nahita Technical Service Department.
Please, in case of any problem turn the centrifuge off and
disconnect it from the net.
Summary of Contents for 2624/2
Page 2: ...2 ÍNDICE DE IDIOMAS INDEX OF LANGUAGES INDEX DES LANGUES ESPAÑOL 3 ENGLISH 29 FRANÇAIS 54 ...
Page 8: ...8 2 Introducción 2 1 Esquema general Figura 1 Parte delantera Figura 2 Parte trasera ...
Page 34: ...34 2 Introduction 2 1 Outlook Figure 1 Front view Figure 2 Back side ...
Page 59: ...59 2 Introduction 2 1 Schéma général Fig 1 Partie avant latérale Fig 2 Partie arrière ...
