Front panel
1 – Main control
2 – Status LED
Main selector
1 –
Main selector
2 – Status LED
3 – OFF / Standby*
4 – Phono input A
5 – Mute
6 – Phono input B
*In standby mode the power consumption is negligible.
The VPS is switched on by moving the selector from the OFF position to the A or
B position, depending on the installed phono inputs. The tubes are preheated for
90 seconds (flashing LED), during which the VPS is in MUTE mode.
NOTE:
In case of an accidental return to the OFF position for less than 90
seconds, the preheating is not reapplied.
When moving between the A, OFF and B positions, a 3 second switching delay is
applied to avoid any unwanted noise.
9
Nagra –
VPS
