Load circuit installation
Insert the load circuit into the
esignated slot on the Phono card.
d
Tighten the supplied spacer screw by
hand to secure it.
Gain stage selection.
The Nagra VPS offers two output
voltages, 300 mV (Lo) and 2 V (Hi),
switchable on the back panel.
In the Lo position, the outputs are directly connected to the tubes. The maximum
output level is approximately 300mV.
If your cartridge or preamplifier does not have enough gain, you can amplify the
VPS’s output by using the Hi setting. It adds a discreet component amplification
stage that boosts the output level to 2 V.
NB
Always mute your preamplifier or integrated amplifier when changing the Hi –
Lo setting, as a small click may be heard at the output.
14
Nagra –
VPS
