Page 13 of 15 Copyright © NAGRAVISION S.A. 2011 August 19, 2011
Specifications
Inputs
Analogue inputs
2 x symmetrical XLR Microphone (Dynamic, +48V Phantom)
Microphone input sensitivity
2.8, 10 and 30 mV/Pa selectable
Limiters
Selectable on microphone inputs, individual or in pairs.
Active at -9.5dBFS, max +40dB for -2 dBFS
THD at 1 kHz
<0.15 % Mic, <0.01% line
Frequency response
10Hz - 48 kHz ± 0.5 dB
Input noise with condenser mic
0.88 µV (-119 dBm)
Input noise with dynamic mic
4 dB (measured ASA "A" loaded 200
Ω
)
Signal-to-noise ratio
>114 dB
Input level adjustment range
50 dB Mic
Input filters
LFA (with vortex filtering), Low cut
External power
Hirose 4 pin connector (9 to 13 V, 3.5W)
Outputs
Analogue line output
2 x XLR 4.4V max. , selectable 0 dBm, +6 dBm or +15 dBm
Headphones
Stereo 6.3mm (¼”) Jack 50
Ω
Recorder
File type
PCM BWF or MPEG 1 L II, 16 bit, 32 to 48 kHz, Stereo / Mono
Memory size
2 GB (corresponds to 2 h 53 min in PCM BWF 48 kHz stereo)
Other
USB Host
USB 2.0 connector type "mini USB"
General
Dimensions
190 x 50 x 175 mm (W x H x D)
7.5 x 2 x 6.9 ” (W x H x D)
Weight
1 Kg (2.2 lbs), including batteries
Power supply
4 Dry cells / NimH cells “AA” type or external 9 - 13V
External power consumption
Approximately 2.8 W (2 Phantom mic. & record)
Battery consumption
Approximately 2.6 W (2 Phantom mic. & record)
Approximately 1.5 W at 6 V (no Phantom, no record)
Battery autonomy
Approximately 2 hours (2 Phantom mic. & record)
Approximately 4 hours (no Phantom, no record)
Relative humidity
From 10% to 99% (non condensing)
