Issue: January 18 2005
Page 20
14.5.4 ALC REACTION SPEED.
The “ALC SPEED” can be set to a “FAST”, “NORMAL” or “SLOW”
reaction time.
14.5.5 BEEP.
The beep signal is only available at the output and is not recorded. It
can be switched “ON” or “OFF”.
14.5.6 FILE FORMAT.
The Ares-BB+ without any soft option can only record in a linear mode
(not compressed). If the soft option # is installed it includes also the
selection of MPEG compression up to 384kb/s. The selection of “24b”
means that the audio is recorded trough a 20 bit A/D converter and the
data format of the file is written in 24 bits.
14.5.7 BACKLIGHT.
The backlight can be set to always “OFF”, always “ON” or
“AUTOMATIC”.
In the “AUTOMATIC” mode, the backlight turns on for 15 seconds, each
time a key is pressed.
14.5.8 OUTPUT MODE.
This sub-menu permits to turn on or off the sound to the output
connector in the case that a little speaker is used instead of a
headphone. “ALWAYS” means that the output sound is always present.
“ONLY IN PLAYBACK” means that the output sound is present only
during playback but not present in the record mode or EE mode.
14.5.9 OUTPUT LEVEL.
The “CURRENT LEVEL” corresponds to the setting before entering the
sub-menu. To modify this level, press the “UP” or “DOWN” keys (9 or
11).
The “DEFAULT LEVEL” is the level that has been saved in the memory.
To modify the “DEFAULT LEVEL” to the value of the “CURRENT
LEVEL”, press the “CENTER” Key (13). The default value will be
remembered even if the unit loses power.
Beep
Off
On
On
Backlight
Off
On
Automatic
On
ALC speed
Fast
Normal
Slow
Normal
Output level
Current level = - 6 DB
Default level = - 9 DB
Output mode
Always on
Only in playback
Always on
File format
PCM 48K 16b
PCM 48K 24b
PCM 44K1 16b
MPEG 256/48 St.
Output level
Current level = - 6 dB
Default level = - 9 dB
