Issue: January 18 2005
Page 14
DELETING A SEGMENT
Example: Index 009 was rewound for 1 second. The play position sits
between the start position and the first cut position. “DELETE
SEGMENT” appears on the screen
When pressing the “DOWN” key (11), the segment from the beginning until the 2 seconds point will be
deleted.
UNDO A CUT OUT
Example: The segment from the beginning until 2 seconds is cut out.
“UNDO CUT OUT” appears on the screen.
If a wrong segment was cut out, it can be re-inserted by positioning the “tape” so that the play position
is on top of the cut position. This can be done in 2 ways. The first is to use the skip function with the
“REWIND” (12) or “FORWARD” (10) key until the cut position is found. The second is by using the
“LEFT” (10) or “RIGHT” (12) key kept pressed to approach the cut line to the play head followed by a
step by step approach until the counter 4 indicates the position. Once the positioning is reached, press
the “DOWN” key (11) to undo the cut out.
TRIMMING CUTS
Example: The first cut position is placed below the play position
indicator.
“LISTEN LOOP/TRIM” appears on the screen
Once the first cut position is made and the playback position sits on that cut position, press the
“CENTER” key (13) once again and the editor starts a loop playback around the cut position. It starts
playing 1second before the cut position and continues to play 1 second after the cut position.
Example: The play starts from 1 second until 3 seconds
“SELECT TRIM SEGMENT” appears on the screen.
During the playback loop, the “LEFT” (10) or “RIGHT” (12) key permits
to select the left or right segment to be trimmed. This means that the
length of the selected left or right segment can be reduced.
Example: The left segment is selected.
“SLIDE LEFT SEGMENT” appears on the screen.
Index 009
00:01
01:23
: Step / Listen
: Delete segment : Exit
: Place cut
00:01
Index 009
00:00
01:21
: Step / Listen
: Undo cut out : Exit
: Listen loop / Trim
Begin 00:02
Index 009
00:02
01:23
: Step / Listen
: Delete cut : Exit
: Listen loop / Trim
00:02 00:02
Index 009
00:02
01:23
: Select trim segment
: :
: End loop
00:02 00:02
Index 009
00:02
01:23
: Slide left segment
: :
: End loop
00:02 00:02
