Issue: January 18 2005
Page 18
14.3.6 CONTRAST.
This menu permits to adjust the contrast of the display. Pressing the
“UP” (9) or “DOWN” (11) key changes the current contrast. Pressing the
“CENTER” key (13) stores the contrast settings as a default value at
power on.
To escape from the sub-menu, press the “LEFT” key (10) once.
14.3.7 VERSION.
Selecting the “VERSION” sub-menu shows the serial number of the
recorder as well as the current version of the software installed. The
version shown in this picture corresponds to the version for the “FAT“
mode. Turning on the machine in the “NFS” mode will show the “NFS”
version.
To escape from the sub-menu, press the “LEFT” key (10) once.
14.4 TEMPLATES.
The Ares-BB
+
can store and recall 4 different templates.
To have an overview of the different sub-menu settings that can be
stored, refer to the menu tree at the end of this manual. Only menu
settings with a red square against it can be
stored.
To use a template, setup the machine as required, then go to
“TEMPLATES”, select “STORE 1” and press the execute key (13). The
message “DONE” will appear. If now any changes were made in the setup, you can go to “RECALL 1”
and press the execute key once again. This returns the machine to the settings stored in template 1.
Templates
Recall 4
Store 1
Store 2
X X X
Contrast
Current contrast = 32
Default contrast = 33
TEST 34
ARES-BB+
S/N : 1234567
Soft (FAT): Vx.xx
Audio board: 2
Software options:
#1 #2 #3
