O P E R AT I O N
5
WIRELESS OPERATION
HT-35 CONTROLS AND CONNECTIONS
s
ON/OFF SWITCH (13)
to power the microphone.
s
LOW BATTERY LED INDICATOR (14)
flashes once for unit “ON”; lights steady for low
battery alert. At that point there will only be minutes left to replace batteries before
operation ceases.
TRANSMITTER SET-UP AND OPERATION
s
Unscrew the
battery compartment cover end cap (15)
and remove, exposing the
battery compartment. Insert 2 pcs fresh AA batteries, observing polarity. Re-attach the
battery cover.
s
Turn on the
microphone power switch (13)
on the handle of the microphone.
The
battery indicator LED (14)
will light up to indicated usable battery strength. In the
case of a dead or low battery, the indicator will either not go on at all or will stay on
continuously, as described above, indicating a need to replace the battery.
To preserve battery life, turn the transmitter off when not in use.
s
The
RF ON indicator (8)
on the WLPA-35 should now be lit.
s
Adjust the
MIC/TS VOLUME (1)
and/or the
TONE CONTROLS (2)
of the WLPA-35 to
clockwise for the desired audio level.
WIRED OPERATION
The WLPA-35 can be operated alone with the wireless microphone supplied, or with an
additional wired mic (not supplied) if two simultaneous separate mic inputs are needed for
an application. This wired input can also be used for a non-mic source, such as a CD or
MP3 player, as for accompanying music. Volume and tone for the combined inputs would
be adjusted as for wireless operation alone.
