background image

CONTENTS

2

1. INTRODUCTION

2.  USING THIS MANUAL

This booklet provides instructions for the operation of the U-800 and includes a 

description of features, a quick user controls guide, a step-by-step guide to operations 

for each unit, system specifications, a troubleshooting guide, miscellaneous tips, and 

servicing information.

1. INTRODUCTION ................................................................................2 
2. USING THIS MANUAL .......................................................................2
3. SYSTEM FEATURES ............................................................................3
4. QUICk USER CONTROLS GUIDE ........................................................4
5. SYSTEM OpERATION .........................................................................8
6.  SELECTING GROUp/CHANNEL, IR pROGRAMMING  

AND SIMULTANEOUS MULTICHANNEL OpERATION  ........................14

7. CAUTIONS AND TROUbLESHOOTING .............................................17
8. MISCELLANEOUS TIpS .....................................................................18
9. SpECIFICATIONS .............................................................................19
10. FREQUENCY pLAN ........................................................................20
11. FREQUENCY LISTS .........................................................................21
12. OpTIONAL ACCESSORIES .............................................................22
13. SERvICE INFORMATION ................................................................22
14. ONE YEAR LIMITED WARRANTY ....................................................23

Thank you for choosing the Nady U-800 wireless system, and congratulations on 

your choice. The U-800 has the best performance and price value in professional 

UHF wireless, offering clear-channel, frequency-agile operation on the UHF band for 

interference-free performance in any application or locale. The U-800 delivers 800 

user-selectable, frequency synthesized channels in the US frequency band 470MHz-

490MHz. The Nady U-800 offers built-in Autoscan for quick and convenient open 

channel selection and set up of one system, or many wireless systems at the same 

location for simultaneous multichannel operation. The U-800 features proprietary 

companding and low-noise circuitry for an industry-best 120db dynamic range, and 

the clearest, most natural sound available in wireless today

Summary of Contents for U-800

























Reviews: