5
Quick User Control Guide
Transmitter Front Panel
1. Earphone Output 1/4” jack:
Connecting stereo earphones for monitoring output signal
2.
Volume Knob:
Adjusting the volume clock-wise (MAX), counter clock-wise (MIN)
3.
Left/Right Source Audio Input Level LCD tree:
Indicates if audio input source level is optional
4. LCD display:
Displaying Channel/Frequency, and other status
5.
Infrared Receptor/Sender LED:
Synchronizes operatingnfrequency between transmitter and receiver as
selected by either
6.
Manual UP selecting button:
Manual setting up with up direction
7.
Set Up Button:
Set up the functions of the transmitter/ scroll through the menu list
8. Manual DOWN selecting button:
Manual setting up with down direction
9.
SYNC Button:
Press this button down can set up the transmitter and receiver’s infrared link and
connection
10.
Power Switch:
Press momentarily to turn ON and for a few seconds to turn unit OFF
Transmitter Rear Panel
11. Transmitter Antenna BNC connector
: Connect antenna before use
12 Left Channel Loop Out:
1/4” jack provides parallel unbalanced pass-through output of input source signal
to other devices
13. Right Channel Loop Out
: see above
14.
Left Channel Audio Source Input:
Combo XLR/1/4” jack, mono
15.
Right Channel Audio Source Input:
Combo XLR/1/4” jack, mono
16.
DC Input Jack:
Connects AC/DC adapter power supply (center of jack is + polarity)
6
Bodypack Receiver
17.
Power and Volume Control:
Combo power ON/OFF switch and earphones volume adjust
18.
Earphone Out:
1/8” (3.5mm) jack for connecting monitoring earphones
19.
Antenna:
permanently attached
20.
RF Signal LED Indicator:
Lights RED when receiving transmitter’s signal
21.
LCD Display:
Displays selected frequency and battery life status (0 Bar=Empty)
22.
Infrared Receptor/Sender LED:
Synchronizes operating frequency between transmitter and receiver as
selected by either
23.
Stereo/Mono Switch:
Selects either stereo or mono output to earphones
24.
Limiter Switch:
Select to limit the audio output level to earphones
25.
Battery Compartment:
Holds 2 x AA Betteries
26.
Battery Compartment Door:
Covers batteries and selection buttons
27.
LOCK Button:
Locks the receiver controls to prevent accidental adjustment
28.
SYNC Button:
Press to download receiver’s Autoscan selected frequency to receiver via infrared link for
frequency synchronization
29.
AUTOSCAN:
Press to automatically find open channel
30. MUTE Button:
For muting the audio output to the headphone
31 .
Belt Clip:
Rotates 180o for attaching to belt with receiver’s top panel in either up or down position
