1 7.1 CHANNEL INPUT
t
Connect to the corresponding analog audio output of a
multichannel source component such as a DVD-Audio or
multichannel-SACD player or external multichannel decoder (disc
copy protected formats only allow analog signal transfer). Typically,
these sources will produce 5.1-channel output, in which case the
Surround Back jacks are left unconnected. The signal present at
these jacks can be heard by selecting Source 7 (7.1 CHANNEL INPUT
is defaulted to this Source).
t
There is no bass-management or other processing (other than
master-volume control) available to this 7.1 channel input.
t
While the multichannel audio output of a DVD/BD player can be
connected to these jacks, using the T 187’s own Dolby Digital and
DTS decoding and digital-analog converters via a digital connection
will usually produce superior results.
2 AUDIO
PRE-OUT
The AUDIO PRE- OUT makes it possible to use the T 187 as a pre-
amplifier to external power amplifiers for some or all channels.
t
Connect FRONT L, FRONT R, CENTER, SURR R, SURR L, SURR-BL and
SURR-BR to the respective channel input of a power amplifier or
amplifiers driving the corresponding applicable speakers.
t
Connect the SUBW1 (and/or SUBW2) output to powered (“active”)
subwoofers or to power amplifier channels driving a passive system.
t
Unlike the full range channels, there is no power amplifier built-into
the T 187 for a subwoofer.
3 FM
ANTENNA
TERMINAL
t
The supplied wire “dipole” FM antenna will connect to the FM
connector using the supplied “balun” adapter. It will usually work
best when mounted on a vertical surface such as a wall, with arms
fully outstretched forming a horizontal “T” perpendicular to the
origin point of the signal.
AM ANTENNA TERMINAL
The AM loop antenna supplied with the T 187 (or a suitable
replacement) is required for AM reception.
t
Connect the supplied AM loop antenna to these terminals. If an
external AM antenna is used, make connections to the AM and GND
terminals in accordance with the instructions supplied with the
antenna.
t
Testing different positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as will as attempts to lengthen the wire to the loop.
t
Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
IDENTIFICATION OF CONTROLS
REAR PANEL
© NAD T 187
AUDIO 6
AUDIO 5
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
OUT AUDIO 4 IN
OUT AUDIO 3 IN
AUDIO 2
AUDIO 1
ZONE 2
R
AUDIO
L
S-VIDEO
IN
32
VIDEO
MONITOR
OUT
VIDEO
AUDIO 6
AUDIO 5
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
OUT AUDIO 4 IN
OUT AUDIO 3 IN
AUDIO 2
AUDIO 1
ZONE 2
R
AUDI
O
L
S-VIDEO
IN
3
2
VIDE
O
MONITOR
OUT
VIDE
O
ZONE 4
ZONE 3
ZONE 2
SUBW
SUBW 2
SUBW 1
CENTER
SURR-B
SURR
FRONT
R
L
AUDIO PRE-OUT
CENTER
SURR-B
SURR
FRONT
AUDIO 6
AUDIO 5
Y
P
B
P
R
Y
3
2
1
P
B
P
R
Y
P
B
P
R
Y
P
B
P
R
OUT AUDIO 4 IN
ZONE 4
ZONE 3
ZONE 2
OUT AUDIO 3 IN
AUDIO 2
AUDIO 1
ZONE 2
HDMI IN 6
HDMI IN 5
XM
DAB
230V VERSION ONLY
ANTENNA
FM
GND AM
HDMI IN 4
HDMI IN 3
3
2
COAXIAL
OPTICAL
1
3
2
1
HDMI IN 2
HDMI IN 1
HDMI OUT 2
HDMI OUT 1
SWITCHED
POWER
+12V TRIGGER
OUT 1
OUT 2
IN
OUT 3
OUT 2
OUT 1
IN
OUT 3
RS-232
ON
AC OUTLET 120V ~ 60Hz
120W 1A MAX
SWITCHED
AC OUTLET 230V ~ 50Hz 120W 0.5A MAX
OUT
ETHERNET
MP DOCK
DATA PORT
OUT
R
7.1 CH INPUT
L
R
AUDIO
L
S-VIDEO
IN
32
1
VIDEO
MONITOR
OUT
VIDEO
HDMI
DIGITAL AUDIO
230V VERSION ONLY
1
2
3
4
5
6
14
17
7
8
9
11
15
10
12
13
16
ATTENTION!
Please make sure that the T 187 is powered off or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
8
ENGLISH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
Р
У
С
СКИЙ
