IDENTIFICATION OF CONTROLS
front panel
1 power button:
Press this button to switch ON the M 55. The LED
indicator will turn from amber to blue and illuminate the VFD. Pressing
the power button again turns the unit back to standby mode.
The M 55 can also be turned ON from standby mode by pressing the
[OPEN/CLOSE] or [PLAY] button on the front-panel as well as on the
remote control.
2 led indicator:
This indicator will light up amber when the M 55 is in
standby state. When the M 55 is at ON state, this indicator will illuminate
blue.
3 remote SenSor:
Point the remote control at the remote sensor and
press the buttons. Do not expose the remote control to a strong light
source such as direct sunlight or illumination. If you do so, you may not
be able to operate the M 55 with the remote control.
distance:
About 23 ft (7 m) from the front of the remote sensor
angle:
About 30° in each direction of the front of the remote sensor
4 vfd:
The Vacuum Fluorescent Display (VFD) provides playback
information, settings and other indicators.
5 navigation and enter buttonS:
The navigation buttons
[
] in conjunction with the [ENTER] button allows one to
navigate the OSD, title and menu screens.
6 Stop:
While a DVD disc is playing, press this button once to stop/pause
disc playback. When [PLAY] button is pressed, play will resume from the
spot it was stopped. If [STOP] button is pressed consecutively during
playback, disc playback will fully stop.
While an audio disc is playing, press this button to stop playback and
re-set the pickup to the beginning of the track. The display reverts
to showing the total number of tracks and total playing time of an
audio disc or total number of WMA/MP3/Audio files. If the M 55 was
programmed to play a selection of tracks, the program will be retained
in the memory.
7 open/cloSe:
Press this button to open and close the disc tray. When
in standby, this button will also power ON the M 55 and at the same
time open the disc tray.
8 diSc traY:
With the DISC TRAY open, insert a DVD, VCD, CD or other
compatible media disc face down onto the tray.
“NO DISC” appears on the M 55’s VFD if the disc is placed upside down
(and it is a single sided disc).
9 plaY/pauSe:
Press this button to start playback. If the disc tray
is open, press this button to automatically close the tray and start
playback if a disc is loaded.
Press this button to toggle between Play and Pause of a DVD, VCD, CD
and other compatible media disc.
10 menu:
The MENU button is used to display via OSD the menus of the
DVD, SACD, VCD, SVCD with PBC and MP3/WMA/JPEG media when
available. The MENU button will also allow you to select between CD
and SACD layers of SACD media.
8
9
10
7
1
2
3
4
6
5
7
EN
G
LI
SH
FR
ANÇ
AIS
ESP
AÑOL
IT
ALIANO
DEUT
SCH
NEDERL
ANDS
SVENSK
A
РУ
ССКИЙ
