background image

MDC CLASSIC UPGRADE SLOTS

The delivery format of digital content is constantly changing in pure digital 
systems like the C 368. Each of these formats typically requires specialized 
hardware and software, often with licensed IP and content copy protection.

To address continuous technological evolution, NAD has placed all digital 
interface circuitry of the C 368 on easily upgradable modules, called 
Modular Design Construction (MDC). The C 368 has provision for two slots 
where MDC upgrade modules can be installed. 

The following optional MDC modules can be integrated with the C 368 - 
DD USB 2.0, MDC HDM-2 and the MDC BluOS modules. Remove covers to 
install the optional Modular Design Construction (MDC) modules. 

Consult with your NAD dealer on how to procure the MDC HDM-2, 
DD USB 2.0 and MDC BluOS modules and their installations to the C 368.

MDC HDM-2

MDC HDM-2 offers three HDMI input terminals and one HDMI output. MDC 
HDM-2 adds HDMI switching and audio capability to C 368. It supports 
4K@60 4:4:4 and HDCP 2.2 compliant.  With MDC HDM-2 installed, C 368 
supports HDMI Control (CEC) and Audio Return Channel (ARC) functions. 
Both functions are possible if external devices that also support both 
features are interconnected with C 368 via HDMI connection. 

If an ARC connection is established, the front panel display will show “HDMI 
ARC”. 

IMPORTANT!

 

Ensure that ARC-connected devices to C 368 have their audio settings 
set to PCM only. 

A  HDMI OUT:

 Connect to corresponding 

HDMI port of HDTV, projector with HDMI 
input or TV that supports HDMI CEC/ARC.

B  HDMI 1 - 3:

 Connect to the HDMI OUT 

connectors of source components such 
as DVD player, BD player or HDTV satellite/ 
cable box.

DD USB 2 .0

A COMPUTER:

 Using Type A to Type B 

cable connector (not supplied), interface 
computer audio to this asynchronous Type B 
USB input to directly stream 24/96 PCM 
content from your PC or MAC.

B  USB BACK:

 Connect a USB mass 

storage device to this input. Typical USB 
mass storage devices compatible with 
C 368 include portable flash memory 
devices and external hard drives (FAT32 
formatted). 

MDC BluOS

BluOS is a music management software developed by NAD’s sister brand, 
Bluesound. Integrating MDC BluOS will add BluOS network and internet 
music streaming with advanced music management to your C 368.

Refer to the “MDC DD BluOS Mounting Instructions” and” Configuring DD 
BluOS” (included with your MDC BluOS package) on how to install and 
integrate the MDC BluOS with the C 368.

IDENTIFICATION OF CONTROLS

REAR PANEL

A

B

8

ENGLISH

FR

ANÇ

AIS

ESP
AÑOL

IT

ALIANO

DEUT

SCH

NEDERL

ANDS

SVENSK

A

РУ

ССКИЙ

A

B

Summary of Contents for C 368























Reviews: