24
45
STRONG PASSWORD RECOMMENDED
– We highly
recommend you create a strong password of your own
choosing (using a minimum of 8 characters, including
upper case letters, lower case letters, numbers, and
special characters) in order to increase the security of
your product.
W
e recommend you reset your
password regularly, especially in high security
system
s
, resetting the password monthly or weekly
can better protect your product.
Note:
You can enable the
STGO2
service for the device during
activation. Refer to Chapter 5.1 for detailed information.
4.
Click
Activate
to finish activation.
You can check whether the activation was successful in the
popup window. If activation fails, make sure that the password
meets the minimum requirements and try again.
3.3
Modifying the IP Address
To view and configure the camera via LAN (Local Area Network),
you need to address the network camera to the same subnet as
your PC.
Use the SADP software or client software to detect the camera and
change the its IP address. IP Address modification via SADP is
shown below.
IP-NC32
8
-VDZ
·
Quick Start Guide
