North American Clutch & Driveline
Rockford, Illinois
Phone: (800) 383-9204
(815) 282-7960
Fax (815) 282-9160
www.naclutch.com
5
DESCRIPTIONS & SPECIFICATIONS
General
The NACD 11.5" TP Power Take-Off are engine mounted power take-offs that use cast
iron two-piece housings and contain an integral triple plate clutch 11 1/2 inches in di-
ameter. The engine drives the clutch through a drive ring that is bolted to the engine
flywheel and connected to the clutch through internal teeth that mesh with external teeth
on the clutch friction plate(s). Clutch engagement and disengagement for most units is
accomplished by use of the external hand lever assembly. Some units may use other
actuation methods.
Main bearings are lubricated and cooled with grease. Most units use pilot bearings that
are pre-lubricated and sealed for life, although some may require periodic re lubrication.
Those that require periodic lubrication are lubricated through a grease fitting located in
the output end or side of the clutch shaft.
Warranty
Equipment for which this manual was written has a limited warranty. For details of the
warranty, refer to the warranty statement at the end of this manual.
