NAC Image Technology Hot Shot CC User Manual Download Page 61 | Manualshive

Page: 61 / 71

background image

HotShot SC User Manual

Rev 1.2.5 –March 2012

© NAC Image Technology Inc

Jimmy Robinson

61

7.2 MCWI Viewing the Data

You can see the data being collected by the MCWI in both LIVE Mode and in Review
Mode.

7.2.1 Live Mode

IN LIVE Mode you can see “samples” of the data for any given channel by pressing
the LIVE MONITOR Button and selecting the Required channel to view with the
Channel Select Buttons.

The Sampling rate of the LIVE MONITOR is dependant on the Sampling Rate of the
LIVE Video and will depend on the PC Specification. To speed up the Live Monitor
Sample rate you can use the “Speed Boost” option if you have a Colour Camera.
(See section 6.7.1).

A sample Live Monitor output is show to the
left. The LIVE MONITOR button toggles the
Live Monitor Display Update ON and OFF.
The Buttons specify which channel to
monitor.

7.2.2 Review Mode

To view the data in Review Mode push the PLOT Button for the required channel.
The Data will be graphed for the SPECIFIED frame range (see section 6.7.5). If the
number of frame is GREATER than 5000 then the displayed data will be Sub-
Samples to 1 sample per frame regardless of the actual number of samples per
frame. If the frame range to plot is LESS THAN 5000, then you can specify if you
want to sub-sample or not.

7.2.3 Graph Manipulation

Once you have plotted graphs there are two viewing options, as a graph or as a list.
These are shown below

«
...
59
60
61
62
63
...
»

Summary of Contents for Hot Shot CC








































































Reviews:

No comments

Related manuals for Hot Shot CC

Brand: Vitek Pages: 28

Brand: Papago Pages: 9

Brand: Dynascan Pages: 33

Brand: Hi Sharp Pages: 3

Brand: Kapture Pages: 16

Brand: Tamron Pages: 8

Brand: BTECH Pages: 2

KB20 - 35 Mm Camera

Brand: Kodak Pages: 21

TRAIL SENTRY 119303

Brand: Bushnell Pages: 16

Brand: TAIWAN-SPY Pages: 8

ED 8mm F3.5 Fisheye

Brand: Olympus Pages: 2

Brand: Component Solution Services Pages: 16

Brand: Basler Pages: 170

Mini Pioneer 120

Brand: Godox Pages: 4

Brand: Idis Pages: 20

150-600mm F5-6.3 DG OS HSM

Brand: Sigma Pages: 2

DCS-6620G - Network Camera

Brand: D-Link Pages: 24

SECURICAM Network DCS-5300W

Brand: D-Link Pages: 145

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands