Chapter 2 Product Overview
6
Parts codes of catalog products
2.2.
The parts codes are assigned as follows for the RD2 series catalog products.
For detailed specifications of those products not included in the catalog, refer to the separately provided
“Outer dimensions” drawings and specification sheet. If anything is unclear, contact our service
department.
<Parts codes of catalog products>
The parts code of catalog products has “R” at the beginning of the product code.
Any other code indicates product not included in the catalog.
For the part number, check “Part number” located on the shipping label of the product (Fig. 4-3).
Note: The last digit of the parts code, within the range from 0 to 9 (“0” in the above parts code) indicates
the revision code.
Note that this number may not be “0”.
Lubricant
2.3.
The specified lubricant is filled before shipping.
• When replacing the lubricant, be sure to use the Nabtesco-specified lubricant. For purchase of the
lubricant, contact our service representative.
• Do not mix it with other lubricants.
Table 2-1
Brand specified by Nabtesco
VIGOGREASE RE0*
Operating temperature range
(ambient temperature)
-10 to 40°C
* VIGOGREASE is registered trademark of Nabtesco Corporation.
In order to take advantage of the performance of this product, use the Nabtesco-specified lubricant.
Using other types of lubricant could cause deterioration of performance and premature damage.
Mixing with other lubricants could cause deterioration of performance, generation of abnormal noise,
and premature damage.
Note
Example) PRDS040E 153 B2 CF 2E0
Product code
Bushing code
Motor flange code
Input unit code
Model code
Ratio code
