Chapter 4 Preparations for installation
21
4.3.3. Label indication
A label is attached to the circumference of the main unit casing of this product.
The following describes the contents of the label.
This label proves that this product is a Nabtesco precision reduction gear. Be careful not to peel off
the label.
4.3.4. About sealing tape
Sealing tape that has a clear left half and yellow right half is affixed to the label as shown in the photo
below.
When the customer coats the circumference of the reduction gear, this label is hidden. After coating and
drying, peel off the sealing tape to make the label visible.
Note: When the customer uses a substance other than urethane or epoxy, contact us.
Even when coating is not performed on the circumference of the reduction gear, the sealing tape may
peel off and enter the customer’s equipment. For this reason, be sure to peel off the sealing tape.
Note: When degreasing the reduction gear, do not use the degreasing agents shown below.
Ketone system (MEK, MIBK), ester system (ethyl acetate, butyl acetate), aromatic system (toluene,
xylene)
Procedure for peeling off sealing tape
(1) The sealing tape has a two-layer structure. Pinch the right end of the first tape.
Logo of Precision Reduction Gear RV Serial number
Our logo
Fig. 4-10
QR code
(Reading this QR code will display our Website URL
and the serial number.)
Fig. 4-11
Important
