Chapter 2 Product overview
4
(3) Original series
The shape of the reduction gear may differ from the illustration depending on the ordered
specifications.
2.2. Parts codes of catalog products
The parts codes are assigned as follows for the E series, C series and original series catalog products.
For detailed specifications of those products not included in the catalog, refer to the separately provided
“External dimensions” drawings and specification sheet. If anything is unclear, refer to our contact
information.
<Parts codes of catalog products for E series and original series>
Example) P35E001B00, P35E001D00, P35E001F00
Only for the E series and original series, when the third digit from the end of the parts code is “B”, “D”, or “F”, the
code indicates a catalog product.
Any other codes indicate products not included in the catalog.
For the parts code, check “Parts code” indicated on the shipping label of the product (Fig. 4-8).
<Parts codes of catalog products for C series>
P10L010-00, P10L014-00, P10L017-00, P10L018-00, P21L014-00, P21L015-00, P21L018-00, P21L019-00,
P31L012-00, P31L013-00, P31L014-00, P31L015-00, P41L013-00, P41L014-00, P41L017-00, P41L018-00,
P51L004-00, P51L005-00, P51L009-00, P51L010-00, P65L002-00, P65L013-00, P65L021-00, P65L023-00,
P76L004-00, and P76L014-00
Only for the C series, the above parts codes indicate the catalog products.
Any other codes indicate products not included in the catalog.
For the parts code, check “Parts code” indicated on the shipping label of the product (Fig. 4-8).
Note: The last two digits of the parts code, within the range from 00 to 99 (“00” in the above parts code), indicate the
revision code.
Fig. 2-3
Tapped hole for
shaft installation
Shaft
Case
O-ring groove
on the case
Tapped hole for
hanging bolt
Case fixing hole
Spur gear
Standard input gear
(Optional)
Removal
tap
Important
