10
Outer clamp
Inner clamp
Battery connector
Clamping bolt
Tube
Battery connector
Circuit board
connector
The battery connector has
been disconnected for ship-
ment. To use the Hybrid Knee,
be sure to insert the battery
connector into the circuit
board connector.
3-2-2
Assembling the Tube
3-2-3
Inserting the Battery Connector
For safe use, you are recom-
mended to use the tube made
by Nabtesco. When using one
made by any other manufac-
turer due to unavoidable circum-
stances, be sure to use one whose
outside dimension tolerance is
/-0.05 mm.
Before inserting the battery
connector, be sure to elimi-
nate static electricity by, for
example, touching a desk.
・Connecting the adjustment unit, perform reset.
・Confirm that motor sound is normal.
* When the motor continues to run, perform the reset operation. (There is
a risk that battery electricity may be abnormally consumed.)
Fig. 8a Assembling the Tube
Fig. 8b Inserting the Battery Connector
1
Loosening the outer clamp bolts, insert the tube into the inner clamp and
push the tube until it hits the stopper of the inner clamp.
2
When assembling the tube, be sure to align the split groove of the outer
clamp with that of the inner clamp.
3
Tighten the bolts to a torque of
4.5 to 5.0 N･m.
CAUTION
CAUTION
CAUTION
