9
0 to 10 mm
3
Before Use
3-1
Scope of Delivery
3-2
Assembly Procedure
3-2-1
Static Alignment
● Alignment of frontal plane
Perform static alignment according to the
following procedure.
Complete alignment so that the load line
passes through the center of the knee joint
and falls in the heel center of the foot section.
● Alignment of sagittal plane
As shown in Fig. 7, complete alignment so
that the weight load line passes the range of
0 to 10 mm in front of the center of the
knee axis of the knee joint.
・Hybrid knee ･･･････････････････････1
・Dedicated lithium battery ･･･････････1
(already set)
・Userʼs manual･･････････････････････1
(After explaining the content, hand it directly to the amputee.)
・Instruction manual (this book) ･･･････1
Please confirm that the following items are included.
When the recommended alignment is out
of line, excess load is imposed to the parts,
accelerating wear.
For a hip prosthesis, use of a torsion
adapter is recommended.
Fig. 7
CAUTION
