81-SS30048a
- 10 -
[For Distributors]
The first half of this manual describes information for users. Be sure to check that information along
with the information described for distributors.
7 Information for Distributors
7-1 Warnings and Cautions
・
Sufficiently tighten the bolts. Failure to do so results in the risk of wheel disengagement and thus falling.
・
Verify that the detent is reliably seated in the predetermined position. Failure to do so results in the risk of
wheel disengagement and thus falling.
・
Do not insert fingers into the adjustment window. Finger insertion results in the risk of injury.
・
This product has an installation direction. Be sure to verify the direction.
・
Do not attempt to adjust the product beyond the scope of adjustment. Doing so results in the risk of brake
damage.
7-2 Installing the Product to the Rollator
・
In a case where the product has been dropped, operates abnormally, or produces an abnormal noise, do
not use the product. If repair is required, be sure to contact the distributor.
・
Do not remove and install the CONPAL unit to another Rollator or device. Doing so may lead to an
unanticipated accident.
・
Securely insert the adapter of the CONPAL unit into the indented sections of the Rollator. If insertion is
inadequate, play may arise in the installation area and the CONPAL unit may come off.
・
Securely tighten the main body installation nuts. If tightening is inadequate, play may arise in the
installation area and the CONPAL unit may come off.
・
The product has an installation direction. Left and right be sure to verify the direction.
Failure to do so
results in the risk of an inadequate brake force, resulting in falling.
WARNING
WARNING
CAUTION
CAUTION
