NABO KGK 2950, User Manual

Page: 29 / 37

6)Put freezing door on bottom hinge and install middle hinge, hole caps
7)
Put refrigerating door on middle hinge
,
top hinge
.
connect terminal ④
with
terminal
��
connect terminal
②
with terminal
��
top hinge cover and hole cover.
Take out the left top hinge , left top hinge cover from accessories package.
install signal line signal line
signal line signal line install
5)a)
b)Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
Take off the sleeve pipe and hole caps on the freezing chamber door and mount it on the other side.
Remove the upper cover of refrigerating chamber door,install the upper hinge sleeve,door signal line to
the other side and install the door upper cover,
Dismantle the stopper and sleeve pipe from the right bottom of freezing chamber door, take out another spare
stopper(for reversible door), and assemble the sleeve pipe and spare stopper on left bottom of door by screw
install the upper hinge sleeve
,
door signal line to the other side and install the door upper cover.
For the assembly of handle, please refer to chapter 2.2.
28
sleeve pipe
stopper screw
stopper
door upper cover
stopper
sleeve pipe
stopper screw
door signal line
sleeve pipe
a
b
hinge cover
hole cover
ᴻ
ᴼ
ᴽ
ᴺ
（
The picture above is only for reference.
）
middle hinge
hole cap