Page 8 of 15
1-877-622-2697
WWW
.
NABCOENTRANCES
.
COM
Acusensor 3
____________________________________________________________________________________________
Delayed activation can occur as rows are eliminated
When detection area is tilted toward the door, the bottom edge of the header can block the
sensor pattern if the sensor is installed too high on the header. DO NOT install sensor higher
than 4.5 inches above the bottom edge of the header.
Figure 5
Figure 6
Set the rows using dipswitches 7 and 8
Setting the base angle
DN0359
DN0359
DN0359
DN0359
Figure 7
Setting the depth screw angle
