15
Maintenance and
cleaning
Activities required before starting
maintenance
Do not touch the mains plug with wet or damp
hands. Always unplug the appliance before
Cleaning the device.
Activities intervals
Daily
Enjoy your Naava
Every 7-14 days
Fill the water tank.
Check the bottom and backside of Naava.
Observe the plant condition.
Monthly
Clean the frame.
Clean the LED lamp.
Prune the plants.
Clean the plants.
Add nutrients.
Twice a year
Clean the water tank.
Filling the tank
Fill the tank with fresh, room-temperature drinking
water. The time of the year, air temperature, and air
quality affect the water consumption of your Naava,
therefore monitor the water consumption and add water
as needed. There should always be at least 15cm/6" of
water in the tank. Stop the filling up when the water
reaches a level of about 5cm/2” from the top of the water
tank. Make sure no water ends up on the floor.
Do not overfill the water tank!
Checking the bottom and backside of
Naava
Regularly check Naava bottom and backside for possible
hidden surprises such as water been condensed or
splashed on the floor or backside. If you find any, please
remove them.
Observing the plant condition
Your Naava contains live plants. All live plants might get
pests from various sources. Inspect your Naava for
possible pests and remove them if found. If some of your
biofilter plants reach the end of their life, you can buy
spare biofilter plants from Naava.
Cleaning the frame
Clean the device with a soft, damp, and lint-free cloth.
Ensure that no moisture enters the frame. Do not use
abrasive
cleaners or cleaning methods.
Cleaning the LED lamp
Clean the lamp with a soft, damp, and lint-free cloth.
Ensure that no moisture enters the housing. Do not use
abrasive
cleaners or cleaning methods.
Cleaning the water tank
Empty the water tank. Remove all extra material from the
water tank (such as plant parts, growth media, etc). Clean
the tank inside with a soft, damp, lint-free cloth. Do not
use cleaners or abrasive cleaning methods. Fill in the tank
after cleaning. (instructions above: Filling the tank).
Tipping hazard! Naava is not intended to be
installed water tank empty
The cleaning of the water tank needs to be done by a
minimum of two persons. The other supporting and
observing the Naava stay upright.
Pruning the plants
Prune the plants frequently to make sure each plant has
space and the strongest plants will not take space from
weaker plants. This way it will be ensured that all the
biofilters will work properly. Make sure you are using the
right pruning method for each plant species.
Cleaning the plants
Clean the plants with a soft, damp, and lint-free cloth or
paper by gently wiping the surface of the leaves. Keep
your other hand underneath the leaf and wipe against it,
but don’t use much force to prevent damages to the plant.
If there is only a minor amount of loose dust, it can be
©Naava Group Oy 14.04.2021
Version 1.9.1
Summary of Contents for Duo N100x210
Page 1: ......
