(Revised 4-9-2013) NT24k Managed Industrial Ethernet Switch User Manual & Installation Guide Page 67 of 132
N-View – Configuration
The Configuration tab under the N-View category will display two basic variables for N-View, the status
(Enabled or Disabled) and the interval between packets.
Following the Modify button on the above example, the administrator can modify the variable to change the
frequency with which N-View reports information. Increasing the interval will slow the update rate.
Decreasing the interval will allow N-View to report more frequently. The range is 5 to 500 seconds.
Additionally, you may Disable or Enable N-View altogether.