N-Tron 712FX4 Series, User Manual & Installation Manual

Page: 162 / 163

(Revised 2012-05-01)
Page 162 of 163
< Gateway2 > 192.168.2.2 </ Gateway2 >
</ Advanced >
< IPMaps >
<! -- The DynamicRange is the only IP Map supported. You may have 0 or more. -- >
< DynamicRange >
<! -- low and high within range of profile -- >
< LowIP > 192.168.2.1 </ LowIP > <! -- required -- >
< HighIP > 192.168.2.4 </ HighIP > <! -- required -- >
</ DynamicRange >
</ IPMaps >
</ Profile >
</ DHCPServer >
<! -- ______________________________________________________________________________________ -- >
<! -- MAC security -- >
< MACSecurity >
< Mode > learning OR locked </ Mode > <! -- Mode must be learning or locked -- >
<! -- Authorized entries -- >
< Authorized mode ="keep or delete"> <! -- mode must be "keep" or "delete" -- >
<! -- mode=delete - delete existing authorized MACs before adding
authorized MACs (default) -- >
<! -- mode=keep - do not delete existing authorized MACs before
adding authorized MACs -- >
< ValidatePorts > yes OR no </ ValidatePorts > <! -- optional -- >
<! -- Must be yes(default) or no.
If no, invalid ports are ignored. -- >
< Entry >
< MACAddress > 00:07:af:ff:5b:c0 </ MACAddress > <! -- 17 character limit -- >
<! -- MAC is valid on all ports listed in the ports list.
If the ports list is missing, then the MAC is valid on all ports. -- >
< Ports >
< Port >
<! -- Use PortNumber or PortName -- >
< PortNumber > 4 </ PortNumber > <! -- 1 to maximum port for switch -- >
</ Port >
< Port >
< PortName > TX5 </ PortName > <! -- Name of port on switch -- >
</ Port >
</ Ports >
</ Entry >
< Entry >
< MACAddress > 0007af1d6460 </ MACAddress > <! -- Example of a MAC with no
delimiters, valid on all ports. -- >
</ Entry >
</ Authorized >
</ MACSecurity >
</ SystemConfiguration >