Revision 2010-11-15
Page 8 of 33
Setting up the DHCP Server Mappings
Mappings are used to define rules that are used in determining what IP address will be
offered to the client.
N-Tron provides the following Mapping Types:
Figure: Mapping_1
Setting up a Dynamic Range
IP address allocation is Dynamic and is based on the first free IP address in the defined
range. The IP address could be different each time the Client makes a request.
Topology
:
DHCP
Client
Example:
In this example connections can be made to any port on the server or on a switch connected to the
server. The IP address given will be the next available address in the range defined.
Setup:
Click on: DHCP / Server / Setup IP Maps. See Figure: Menu_1
Click on: Dynamic Range. See Figure: Mapping_1
Reference Figure: Dynamic_1 below.
Select the Profile you wish to add this mapping too.
Enter
Low IP
: Ex. 192.168.2.25
Enter
High IP
: Ex. 192.168.2.35
Click
Update
when finished.
Figure: Dynamic_1
