Revision 050908
Page 85 of 101
CLI Commands, Continued…
Reset the Switch
Command Name
reset
Description
Reset (reboot) the switch
Syntax
reset
Parameters
None
Example
N-TRON/Admin> reset
Performing Soft-Reset...
…
Notes
Show or Clear the Last System Error
Command Name
syserr
Description
Show or clear the last system error
If
clear
is not supplied, then the last system error is displayed.
Syntax
syserr
[clear]
Parameters
clear
Clear the last system error.
Example
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name
sysinfo
Description
Show system information
Syntax
sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-Tron 700 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 708FX2
+ Boot Loader: BL 1.0.1.2 (0x01000102)
+ OS Version: 1.0.5
+ Build Date: Jan 29 2008 at 09:22:45 (0xFC100000)
+ Copyright: Copyright(c)2008 N-Tron Corp. All rights reserved.
+
+ Processor: 66 MHz (66000000)
+ Flash Size: 8 MB
+ SDRAM Size: 16 MB
+ MAC Address: 00:07:af:ff:b8:00
+ IP Address: 192.168.1.225
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Notes
