background image

EN 

 

 

34 

21.

 

WARRANTY 

With  this  WARRANTY  CERTIFICATE,  Nolangroup  warrants  to  the  purchaser  that  the  product,  at  the 
time of purchase, is free from defects in materials and workmanship. 
We kindly ask you to: 

 

Read the warnings for safety and proper use. 

 

Read the warranty terms and conditions. 

 

Keep  the  original  purchase  receipt.  This  receipt  must  be  presented  in  case  of  repairs  under 
warranty. In these cases, the product must be sent to the dealer where the purchase was made. 

 

21.1.

 

Warranty coverage and validity 

If  any  defect  covered  by  this  warranty  certificate  is  detected  within  the  period  specified  for  the 
country of purchase (see table at the bottom of this leaflet) from the date of purchase shown on the 
receipt, Nolangroup will repair or replace the defective product through its distribution network and 
after having verified the defect. Nolangroup will provide all material and labour reasonably necessary 
to remedy the claimed defect, except in the cases where damage is caused by one of the items listed 
in the following paragraph "Exclusions and limitations of coverage". 
 

21.2.

 

Exclusions and limitations of coverage 

This warranty covers only defects in materials and workmanship.  
Nolangroup  cannot  be  held  liable  for  product  defects  attributable  in  whole  or  in  part  to  any  other 
cause, including but not limited to: 
 

 

Defects or damage resulting from use of the Product in conditions other than the usual ones. 

 

Damage caused by improper use and not in compliance with normal operation as indicated in the 
instructions for use and maintenance of the product provided by Nolangroup. 

 

Neglect and normal wear and tear of internal and external parts. 

 

Any damage resulting from an accident. 

 

Any  modification  or  tampering made  to  the  helmet  or  to the  N-Com  system  by  the  user  or  third 
parties. 

 

Use  of  incompatible  accessories  not  approved  by  Nolangroup  for  the  purchased  N-Com  device 
model.  

 

Consumable parts considered to be subject to wear and tear, such as the rechargeable battery and 
the connection cables between N-Com systems and other devices. 

 

The  proper  functioning  of  the  product/peripheral  device  combination  when  the  product  is  used 
together with accessories or equipment for which Nolangroup has not verified compatibility. 

 

All  specific  and  subjective  situations  that  may  arise  during  actual  use  of  the  helmet,  such  as,  for 
example, problems related to comfort while riding or aerodynamic noise. 

 
Under  no  circumstances  shall  Nolangroup  be  liable  for  any  incidental  or  consequential  damages 
(including, without any limitation whatsoever, injuries to one or more persons) resulting from failure 
to fulfil the obligations arising from this warranty regarding Nolangroup products. 
 

21.3.

 

Procedure for submitting claims 

In order to submit any claim covered by this warranty, the purchaser must notify directly the dealer 
where  the  N-Com  system  was  purchased  of  the  alleged  defect,  presenting  at  the  same  time  the 
product which is the object of the claim and a copy of the sales receipt. 

Summary of Contents for B902L





































Reviews: