23
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
Through the N-Com EASYSET APP, the “
Intercom Easy Pairing” can be carried out. This
mode allows the N-Com systems to be recognised and stored through a QR code
generated on one’s smartphone.
The
Intercom Easy Pairing function is only available for B902 systems.
17.2.
Pairing up other N-Com
Important: The procedure described here below refers exclusively to the pairing up of “900” series N-
Com systems with N-Com systems OTHER THAN the “600”/“900” series
2
.
•
Make sure the systems are turned off.
•
Put B902 system in “Pairing up” menu: press the “ON” key and keep it pressed for 4 seconds, until
you hear the voice announcement “
Pairing up Menu”.
•
Put the N-Com system in “Setting” mode: press the “ON” key and keep it pressed for 4 seconds,
until the blue LED starts to flash quickly.
•
On B902 system, press the key “
” until you reach the option “
Pairing up other N-Com”.
•
On B902 system, press the key pertaining to the “pre-setting position” where you wish to save the
other N-Com system.
Pairing up CHANNEL 1
Briefly press “n”.
Pairing up CHANNEL 2
Press the “n” key twice.
Pairing up CHANNEL 3
Press the “n” key three times.
The Intercom connection with the selected channel is automatically activated at the end of the pair up
procedure.
17.3.
Intercom function (one-to-one connection)
To establish an Intercom connection with one of the systems stored in memory, simply press the
command related to the channel where the system was saved.
Connection CHANNEL 1
Briefly press “n”.
Call CHANNEL 2
Press the “n” key twice.
Call CHANNEL 3
Press the “n” key three times.
Disconnection of active intercom
Briefly press “n”.
N.B.: In case the pre-setting position is empty, or the system being called cannot be reached within
the maximum range or it is already engaged in a phone call, you will hear an error voice message.
N.B.: In case the Intercom connection system falls outside the range (Intercom connection
interrupted), the B902 system will automatically try to reconnect every 8 seconds. Double beeps will
be emitted until the Intercom connection is not restored.
2
Except for Bluetooth kit and Bluetooth kit2, which are not compatible.
