Mytrex MXD3G User’s Manual
Rev 0 July 29, 2013
Page 19 of 21
Spoken Message
Meaning
Suggested Action
Range Test Mode
The T/L button has been pressed
once, placing the unit in Range Test
Mode
Walk around and press the PHB to
conduct a range test, as instructed
on page
10
.
Service mode
The unit is in a special mode for
programming.
This mode is for provider use only.
Press RESET to exit the mode and
return to normal operation
System initializing
The unit is being registered with the
cell network
Wait for the unit to complete the
registration process, after which it
will speak another message
System ready
The system is in normal operation
and ready to process alarm signals
Press the PHB any time that help is
needed
Notifications
Your MXD3G has been registered with the U.S. Federal Communications Commission (FCC), in
accordance with FCC Rules Part 15.
Repair information:
If trouble is experienced with this equipment (MXD3G personal emergency response system), please
contact your provider for warranty or repair information.
Caution
: Changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
Interference Information:
FCC Rules Part 15: The MXD3G complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note
: Your MXD3G has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Move the MXD3G away from your radio or television
Plug the MXD3G into a different power outlet than your radio or television.
Reorient or relocate the receiving antenna.
Consult your service provider or an experienced radio/TV technician for help.
