SS-1200 Rev. A
OWNER’S MANUAL
4
MYTEK AMERICA
2.2 Remote Control
4
4 BUTTON FM LCD REMOTE
2.3 Remote LCD Screen & Buzzer
LCD SCREEN
FUNCTION
BUZZER
Range – In 2 way range
1
Arm and Door Lock
1
Disarm and Door Unlock
1
Trunk Release
1
Remote Start On
1
Alarm Triggered
Groups of 2
Option
1
Low Battery
2
*LCD displays current system mode.
SECTION 3: SYSTEM OPERATION
The SS-1200 is very sophisticated, but the operation is simple. Your three button RF the transmitter is easy to use
for arm, disarm, personal protection, keyless locking and unlocking, trunk release, remote engine start and stop.
3.1 Remote System Arm (On)
1. Press and release the transmitter button #1.
2. One siren chirp sound and a light flash verify the operation.
3. Doors Lock (If optional keyless entry is installed).
4. Visible theft warning LED light flashes slowly.
5. DEFECTIVE ZONE BYPASS: If you hear four chirp sounds, the system has detected a faulty sensor or you
have delayed interior light.
Ø
Faulty sensor is detected because of a door open, or because of a faulty door pin switch or shock
sensor. The system will bypass a detected faulty sensor until it is restored to normal. If your alarm
indicates a faulty sensor, check your door to see if they are closed properly. If problem persist, contact
your local dealer.
Ø
If you have delayed interior light (in other words, your interior lights do not turn OFF when you close
your car door), it is normal to hear four chirps. The system will protect all openings once the interior
light turns off.
BUTTON
PRESS
TIME
FUNCTION
BUZZER
1 sec.
Arm
1
1 sec.
Disarm
1
1
3 sec.
Panic (Personal Protection)
1
2
2 sec.
Trunk Release
1
3
1 sec.
Remote Start
1
4
1 sec.
Status Check / Pager Mode
1
*3 buzzer indicates out of range condition.
