Mytee UltraGlide RD-13, Instructions Manual

Page: 5 / 12

5
Dear Customer:
Congratulations on the purchase of your new UltraGlide™ RD-13. As you are
already aware, the scene of the equipment world is becoming more high tech, and
we at Mytee Products Inc. strive to keep you on the cutting edge with superior quality
and technology.
Keep in mind that the UltraGlide™ RD-13 is a machine, so neglect or abuse
will cause unnecessary damage and void the warranty. However with simple
maintenance the RD-13 will give quality performance for many years to come.
If warranty questions arise, please consult your user manual or get in touch with
your distributor. If you have questions about maintenance, replacing parts or
ordering parts, please call an authorized Mytee Products Inc. Service Center.
To see an updated list, visit our website at www.mytee.com.
Before you begin using your new machine, please read your manual thoroughly.
Sincerely,
Mytee Customer Care Dept.
Grounding Instructions
This machine must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electrical shock. This machine is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must
be plugged into an appropriate outlet that is properly installed in accordance with all
local code and ordinances. Do not remove ground pin; if missing, replace plug before
use.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or service person if you are in doubt
as to whether the outlet is properly grounded. Do not modify the plug provided with
the machine. If it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounding plug
that looks like the plug illustrated in Figure 1 below. A temporary adapter illustrated
in Figures 2 and 3 may be used~to connect this plug to a 2-pole receptacle as
shown in Figure 2 if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet (Figure 1) can be
installed by a qualified electrician. The green colored rigid ear, tab or the like
extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box cover. Whenever the adapter is used, it must be held
in place by a metal screw. Grounding adapters are not approved for use in Canada.
Replace the plug if the grounding pin is damaged or broken.
The Green (or GreenYellow) wire in the cord is the grounding wire. When replacing
a plug, this wire must be attached to the grounding pin only.
DO NOT use extension cords.
Please Note for America use only
Parts and Service
Repairs, when required, should be performed by Mytee service personnel or Mytee
authorized Service Center using Mytee original replacement parts and accessories.
Call Mytee for repair parts or service. Please specify the Model and Serial Number
when discussing your machine.
Name Plate
The Model and Serial Number of your machine are shown on the Nameplate on the
back panel of the machine. This information is needed when ordering repair parts
for the machine. Use the space provided on the front cover to note the Model and
Serial Number of your machine for future reference.
Unpacking the machine
When the machine is delivered, carefully inspect the shipping carton and the
machine for damage. If damage is evident, save the shipping carton so that it can
be inspected by the carrier that delivered it. Contact the carrier immediately to file a
freight damage claim.
Caution and Warnings
Symbols
Mytee uses the symbols below to signal potentially dangerous conditions. Always
read this information carefully and take the necessary steps to protect personnel
and property.
Is used to warn of immediate hazards that will cause severe personal injury or death.
Is used to call attention to a situation that could cause severe personal injury.
Is used to call attention to a situation that could cause minor personal injury or
damage to the machine or other property. When using an electrical appliance, basic
precautions should always be followed, including the following: Read all instructions
before using this machine. This product is intended for commercial use only.
To reduce the risk of fire, electrical shock, or injury:
1. Read all instructions before using equipment.
2. Use only as described in this manual. Use only manufacturer’s recommended
attachments.
3. Your floor machine is equipped with a safety switch lock and power switch triggers
designed for your safety. Do not attempt to bypass or defeat the safety switch lock.
Never use any device to lock the power switch triggers in the “ON” position.
4. Always unplug power cord from electrical outlet before attempting any adjustments
or repairs.
5. Use care to keep the electrical supply cord from contacting the rotating brush or
drive block.
6. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
7. Do not pull or carry by cord. Do not close a door on cord or pull cord around sharp
edges or corners.
8. Connect to properly grounded (3-wire) outlet only refer to grounding instructions.
9. Do not run appliance over cord. Keep cord away from heated surfaces.
10. Do not use with damaged cord or plug. If cord is damaged, repair immediately.
11. Turn off all controls before unplugging.
12. Do not use outdoors.
13. Always unplug or disconnect the appliance from power supply when not in use.
14. Do not handle the plug or floor machine with wet hands.
15. Do not allow to be used as a toy. Close attention is necessary when used by or
near children.
16. Wind the cord no tighter than is necessary to retain it during storage.
17. Do not use in areas where flammable or combustible material may be present.
18. Do not leave the unit exposed to harsh weather elements. Temperatures below
freezing may damage components and void warranty.
19. Use only the appropriate handles to move and lift unit. Do not use any other parts
of this machine for this purpose.
20. Keep hair, loose clothing, fingers, and all parts of the body away from all
openings and moving parts.
21. Use extra care when working near stairs.
22. To reduce the risk of fire or electric shock, do not use this machine with a solid-
state speed control device.
23. The voltage and frequency indicated on the name plate must correspond to the
wall receptacle supply voltage.
24. When cleaning and servicing the machine, local or national regulations may apply
to the safe disposal of liquids which may contain: chemicals, grease, oil, acid, alka-
lines, or other dangerous liquids.
25. Store your floor machine indoors in a cool, dry area.
26. Keep your work area well lit.
27. Do not leave operating unattended.
Use of flammable chemicals could cause explosion, fire, and death.
Figure 1
Grounding Pin
Grounded Outlet
Grounded Outlet Box
Adapter
Tab for Grounding
Screw
Metal
Screw
Figure 2 Figure 3
GENERAL INFORmATION