Mytee UltraGlide RD-13, Instructions Manual

Page: 4 / 12

4
POSITION GEAR ADjUSTmENT HEIGHT LEVER
The handle can be adjusted to any desired working posi-
tion by simply squeezing the adjustment lever. Move the
handle to the desired position, then release adjustment
lever locking handle in place.
Once you release adjustment height lever, handle will lock
on to gear.
When not in use, loosely wind the power cord around the
cord storage hook on the handle shaft and handle grip.
Note: Disconnect the power cord from electrical outlet be-
fore installing a brush or pad driver. ON - Push the brush
or pad driver firmly in position, then turn it counter-clock-
wise until it locks into place. REMOVE - Turn clockwise
until it stops, then lift off.
ON OFF
BRUSH AND PAD DRIVER INSTALLATION CORD STORAGE HOOK
RD13 ULTRAGLIDE™