9
2 - Machine Operation
It may be easiest to set
the motor speed to the
lowest setting using the
knob on the front of the
handle before switching the
machine on.
♦
2.6 - Cleaning with the T-Rex
When operating, the T-Rex
will stay in one spot while
spinning as long as the
head is flush against the
carpet. To swing the head to
the right, lift the handle up
slightly. To swing to the left,
lower the handle slightly.
To spray solution, squeeze the solution lever on the right
side of the handle.
For best results, clean using an arc pattern or a circular
motion.
♦
2.7 - After Cleaning
After cleaning, switch off the T-Rex by releasing the
power switch lever.
Remove any built up fibers or debris from the cleaning
head and wipe down. Store the T-Rex in the included
protective head cover to protect the cleaning head from
damage.
♦
