8
2 - Machine Operation
2.1 - Powering the T-Rex
Plug the female end of
the extension cord into
the pigtail on the T-Rex.
Next plug the male end of
the extension cord into a
standard, grounded outlet.
The plugs will light up when
powered correctly.
♦
2.2 - Installing the Cleaning Head
Lay the T-Rex back onto the
handle. Take the cleaning
head and place it into the
T-Rex housing, lining up
the female threaded shaft
on the head with the male
threaded shaft on the T-Rex.
Spin the head clockwise
until it stops.
To remove the head, use the included head removal
wrench and place it so it hooks onto the spray bars. Then,
give it a sharp turn counter-clockwise to break it loose.
Spin the head off the rest of the way by hand.
♦
2.3 - Connecting the Hoses
Connect a vacuum hose via 2” Cuff-Lynx™ to the clear
plastic elbow. Insert the male end of the Cuff-Lynx™ and
turn clockwise until it stops to secure.
Connect the female end of a solution line to the male
quick disconnect fitting coming from the handle.
♦
2.4 - Lowering the Handle
Lower the handle to a comfortable height by squeezing
the adjustment lever on the left side of the handle and
moving the handle down. Release the lever to lock the
handle into place.
It is recommended the handle be set to about hip height
when the head is flush with the ground for operation.
♦
2.5 - Switching on the T-Rex
Lift up on the handle so the cleaning head is flush with the
carpet and the wheels are off the ground. Flip the safety
lockout switch forward with your thumb and squeeze
the power switch lever on the left side of the handle to
start the motor. You can now let go of the safety lockout
switch.
