7
3. Connect the telephone
Plug one end of the Handset Cord (curly) into the Handset and the other end into the jack on the side of the telephone.
Desktop mounting
a. Align the tabs of the phone bracket with the notches on bottom at the height of the phone. Press inward and downward
firmly on the bracket until it clicks into place.
b. Plug one end of the line cord (straight) into the telephone line jack
LINE
on the back of the telephone and the other end
into the wall outlet.
Wall mounting
a. Align the tabs of the phone bracket with the notches on bottom at the lower of the phone. Press inward and downward
firmly on the bracket until it clicks into place.
b. Take the handset hook out and flip it to reverse position. It will hold the handset when the phone is in a vertical position.
c. Plug one end of the line cord (straight) into the telephone line jack
LINE
on the back of the telephone and the other end
into the wall outlet.
4. Connect the adaptor
Plug the AC Adaptor into a standard 120VAC wall outlet and switch it. Plug the AC Adaptor lead into the power socket at
the back of the phone.
If you do not subscribe to a Caller ID service, or you wish to set the TIME/DATE
The telephone will beep and the display will show
SET TIME/DATE
Assuming you subscribe to a Caller ID service, the time and date will be automatically updated when the first call is
received. After 10 seconds the display will show the number of calls received
MISSED -00-
,
ANSWER -00-
NOTE:
When the telephone is not in use, if the line is being used by another phone, the display shows
EXTENSION USE
.
12: 0 0
A M
0 1 / 0 1
- 0 0 - - 0 0 -
M I S S E D A N S W E R
→
12: 0 0
A M
0 1 / 0 1
E X T E N S I O N U S E
BACK UP BATTERY
on the screen. It means the back up battery is either low or not fitted. You need to change a new battery, or there are
no functions include Speakerphone and record/play message.
OPERATION
TELEPHONE OPERATION
MAKING AND RECEIVING CALLS
HANDSET SPEAKERPHONE
MAKING A CALL
1. Pick up the Handset from the Base.
2. Dial desired number.
3. Hang up upon completion of the call.
1. Key in desired telephone number.
2. Press
DIAL
(The phone goes to
speakerphone mode automatically).
3. To hang up, press
SPEAKER
key.
RECEIVING A CALL
1. Pick up the Handset from the Base.
2. Speak.
3. Hang up upon completion of the call.
1. Press
SPEAKER
key.
2. Speak
3. To hang up, press
SPEAKER
key again.
8 : 3 0
A M
1 0 / 2 0
0 0 - 0 0
= = T A L K = =
→
8 : 3 0
A M
1 0 / 2 0
5551212
D I A L I N G …
