12
5
J K L 5 J K L 5 J
6
M N O 6 M N O 6 M
7
P Q R S 7 P Q R S
8
T U V 8 T U V 8 T
9
W X Y Z 9 W X Y Z
*
* * * * * * * * *
0
0 0 0 0 0 0 0 0 0
#
# # # # # # # # #
PAUSE
During the memory storage procedure, you may wish to press
PAUSE
to insert a pause between numbers. (This is
sometimes useful for accessing a switchboard, telephone banking or long distance dialing).
Pressing
PAUSE
more than once will increase the pause between digits.
Each time
PAUSE
is pressed, a
‘P
’ will show on the LCD to indicate a pause time (see the section “SETTING PAUSE
TIME” default time is 2000 ms) in the dialing sequence. Each pause counts as one digit.
NOTE:
press
, upper
o
appears; or press
#
, lower
o
appears
REVIEW A NUMBERS FROM THE MEMORY
Press
MEMORY
(Display shows
ITEM -XXX-
,
XXX
is the number of memories stored in the MEMORY), enter the first letter
of the name (e.g “E” for EMMA): Press number 3 twice and scroll with
until the display shows the name and number
that you want to review.
NOTE:
• If the numbers is longer than 15 digits, the number will shift left(1second) automatically until the end of the number has
been reached. The phone will exit automatically approximately 15 seconds after the last activity.
DIALING A NUMBERS FROM THE MEMORY
There are three different ways to dial a stored speed dial number, depending on your preference.
Way 1: Pick up the handset and follow the sequence ‘
REVIEW A NUMBERS FROM THE MEMORY
’ until the display
shows the name and number that you want to dial, and then press
DIAL
.
Way 2: Press
SPEAKER
and follow the sequence ‘
REVIEW A NUMBERS FROM THE MEMORY
’ until the display shows
the name and number that you want to dial, then press
DIAL
.
Way 3: Follow the sequence ‘
REVIEW A NUMBERS FROM THE MEMORY
’ and check the LCD shows the correct
information. Pick up handset the number will be dialed. Or press
SPEAKER
or press
DIAL
(the phone enters
speakerphone mode and dials the displayed number)
USING THE ONE-TOUCH SPEED DIAL MEMORY
There are two ways to dial a one-touch speed dial memory
Way 1: Press a one-touch memory key,
the display shows the emergency number that you want to review or dial out, then
pick up handset or press
SPEAKER
or press
DIAL
.
The number displayed on the LCD will be dialed.
Way 2: Pick up the handset or press
SPEAKER
, then press a one-touch memory key. The phone will dial the number
automatically
CHANGING A SPEED DIAL NUMBER
1. During one-touch memory or MEMORY review.
2. Press
OK
, the display shows
NUMBER?
and the cursor prompt on the right of the last digit
3. Move the cursor to the number you would like to edit by using
or
4. Press
DELETE
to delete the number
then key-in the desired number using the keypad
5. Press
STORE
or
OK
, the cursor prompt on the right of the last letter
6. Move the cursor to the letter to be edited by using
or
7. Press
DELETE
to delete the letter then key-in the desired letter using the keypad
8. Press
STORE
or
OK
(Display shows
VIP ALERT OFF
)
9. Press
or
to choose VIP ALERT ON/OFF.
10. Press
STORE
or
OK
, the phone will beep and the display will show
STORED
CLONING A SPEED DIAL NUMBER
1.
During one-touch memory or MEMORY review.
✒✎
Press
STORE
, the display shows
STORE TO?
3. Press either a one-touch memory location or
MEMORY
, which place you wish to store the number
4. The display shows
NUMBER?
and the cursor prompt on the right of the last digit
5. Move the cursor to the number you would like to edit by using
or
6. Press
DELETE
to delete the number
then key-in the desired number using the keypad
