10
2. You must add an explanation like ” Press pound (#) and 1 to speak or press pound (#) and 2 to confirm your help” in the
emergency message and let the called party know how to do.
PLAYING:
1. Press
REC./PLAY
on standby mode to start playing. the display shows
“
PLAYBACK
“,
2. To stop playing message just press
REC./PLAY
again.
MAKING EMERGENCY CALLS WITH THE PAGER
Your phone dials all your emergency contacts automatically.
1. Press and hold
on the pager, the indicator lights and the pager will emit a long beep then 10 short beeps to
alert you. The emergency message will be played on the speaker for 3 times before starts dialing the alarm number.
Note:
You can stop the alarm call procedure if you press any key on the phone for getting help locally first. Or you can
press
on the pager again to release the alarm call procedure if you misemploy to press the pager key.
2. The phone will dial the first alarm number in the setting list
(see the section of ”
STORING ALARM NUMBERS
”).
Note:
Press any key to turn on speakerphone or pick up the handset will stop the alarm call procedure after dialing an
alarm number.
3. The called party will hear the emergency message then with a tone if they pick up the phone. The emergency message
will play five times continuously with 5 seconds pause time.
The called party can press #, 1 or #, 2 on the dial keypad after the tone. The phone will stop playing and emit a tone
if the called party do the two functions.
a.
If the called party press #, 1: The phone will turn on speakerphone for 1 minute. The phone will turn off the line
if the called party hang up or there are more 8 seconds of silence. The phone will dial next alarm number after
this procedure.
If you want to speak with the called party with no limit, you can press any key or pick up handset or press the
speaker key on the pager. And the phone will discard the alarm call procedure.
b.
If the called party press #, 2: The phone will emit a tone to confirm and turn off the line. And the phone will
discard the alarm call procedure.
Notes:
1. The phone will dial each alarm number make a cycle with three times if the called party don’t pick up phone and press #,
2 to confirm.
2. The phone will dial the setting police, fire department and EMS services on the Emergency Speed-Dial buttons in turn if
there were no alarm numbers were set.
3. The phone will sound beep continuously if the phone is in use when an alarm call procedure is proceeding.
AMPLIFICATION FEATURES
INCOMING VOICE VOLUME
You can adjust the volume of incoming calls by simply sliding the VOL control. This gives you up to18 dB. If you want more
amplification, follow the directions below.
1. While pick up handset, press
AMPLIFY
to turn the incoming voice amplifier on or off. When AMPLIFY is on, the
)))
icon
appears and
AMPLIFY
LED comes on.
2. Adjust the volume in the earpiece by moving the VOL slide control. With AMPLIFY on; incoming volume will be up to
43dB louder.
In standard use, the amplifier turns off whenever you hang up the telephone. This is a useful feature if many people use the
phone. If you want the amplifier to always remain on, slide the switch underneath the phone to AUTO.
Caution:
The handset volume will be up to 43 dB louder if you slide the switch underneath the phone to
AUTO
. Please be
careful if you pick up handset.
NOTE:
(AUTO/MANUAL switch on the back of the phone)
The amplifier will turns off when you switch to Speakerphone mode
INCOMING VOICE TONE
The product provides extra amplification at the sound frequency you need to boost. The identify the sound frequency range
that best suits your need, follow these steps:
1. While pick up handset and hear a voice on the line, press
AMPLIFY
.
2. Adjust the TONE slide control to suit you hearing.
RINGER VOLUME
While the phone is ringing, you can adjust the ringer volume of your telephone by moving the
RINGER VOL.
switch,
located at the right side of the telephone, to the desired
OFF/LO/HI
position
