EN
MY4182 - User manual
34
CLEANING THE BREW HEAD, THE Portafilter AND FILTER
1. Switch the power button on the side of the unit to the off position “O”
and unplug the power cord from the electrical outlet.
2. Some of the metal parts might still be hot. Do not touch them with
your hands until they have cooled.
3. Remove the portafilter and discard the coffee grounds or used pod.
Wash both the portafilter and filter with warm soapy water and rinse
them well. Do not wash the portafilter and filters in the dishwasher.
4. Wipe lower part of the brew head in the unit with a damp cloth or
paper towel to remove any coffee grounds that might have been left.
5. Place the portafilter (without any filter) back in the brew head in the
unit.
6. Place an empty large cup under the portafilter.
7. Turn the function knob to Espresso position and let the unit brew with
water, when done, turn back the function knob to middle position to
stop it.
CLEANING THE WATER RESERVOIR
Discard the remaining water by removing the reservoir and turning
it upside down over the sink. It is recommended to empty the water
reservoir between uses. Wash the water reservoir with soapy water, rinse
it well and wipe it dry. The water reservoir is also dishwasher safe.
CLEANING THE UNIT
1. Wipe housing with a soft wet cloth. Do not use abrasive cleaners or
scouring pads, as they will scratch the finish.
2. Do not store the portafilter in the brew head. This can adversely
affect the seal between the brew head and the portafilter while brewing
espresso.
CAUTION: Do not immerse appliance in water.
DECALCIFIEREA
Mineral deposits built-up in the unit will affect the operation of the
appliance. Your appliance must be delimed when you begin to notice an
increase in the time required to brew espresso, or when there is excessive
steaming. Also, you may notice a build-up of white deposits on the surface
