EN
MY4182 - User manual
26
4. Refer to the instructions on “PLACING THE PORTAFILTER” section before
placing or removing the portafilter and filter from the unit.
5. To clean the inside of the appliance, follow the steps listed on the
section using water in both reservoirs and no coffee in the filter. Do not
immerse the appliance in water or attempt to reach any of its internal
parts.
NOTE: In order for your unit to work properly time after time, clean it after
every use.
IMPORTANT –PRIME THE UNIT
To prime unit, run the steam cycle for 90 seconds by following the steps
below:
1. Fill water reservoir between the “Min” and “Max” levels.
2. Fill the milk reservoir with water between the “Min” and “Max” levels.
3. Select one of the filters and place it on the portafilter. Place the
portafilter in the unit ensuring it is properly locked and place a cup under
it. Also, make sure the tip of the frothed milk dispensing tube is inside the
cup.
4. Plug the appliance into the appropriate outlet.
5. Turn the power button on “I”.
6. The espresso indicator will start blinking, once the indicator become
solid, the unit has been primed and is ready to be used.
SELECTING THE RIGHT COFFEE
THE COFFEE
The coffee should be freshly ground and dark roasted. You may want to try
a French or Italian roast ground for espresso. Pre-ground coffee will only
retain its flavor for 7 – 8 days, provided it is stored in an airtight container
and in a cool, dark area. Do not store in a refrigerator or freezer. Whole
beans are recommended to be ground just before use. Coffee beans
stored in an airtight container will keep its flavor for up to 4 weeks.
