MY4116 Water kettle user manual
Pg. 4
GB
On/Off switch
will be off automatically. You can shut off the power by lifting the
On/Off switch
at any moment during boiling water. If you want to boil water again,
only press down the
On/Off switch
directly to restart the kettle.
NOTE: Ensure that the On/Off switch is free of obstructions and the lid is firmly
closed, the kettle will not turn off if the switch is constrained or if the lid is opening
.
5. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water
may result in scald, besides, don’t open the lid while the water in the kettle is hot.
6. The kettle will not re-boil until the
On/Off switch
is pressed down again. The kettle
may be stored on the power base when not in use.
NOTE: Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool before filling
with cold water to reboil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet and cool it down completely
before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow moisture to
contact with these parts.
2. Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous
cleaner.
3. Remember to clean the filter at intervals. For easier cleaning, detach the filter and then
replace it after cleaning.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle to prevent the gloss loss.
4. When not in use, the power cord can be stored at the bottom of the appliance.
5. When not use or storage, the power cord may be wound under the bottom of kettle.
REMOVAL OF MINERAL DEPOSITS
Your kettle should be periodically descaled as the mineral deposits in tap water may form
