MyQ LiftMaster CAPAC, Installation Manual

Page: 9 / 60

9
Wall Installation
External Antenna Installation
1. Drill (2) pilot holes, spaced 7 in. (17.78 cm) apart, on the wall where the device will be mounted.
2. Use (2) #6 Phillips mounting screws (not included) to attach the device to the wall.
NOTE : For exterior mounting, LiftMaster recommends the use of a polycarbonate NEMA enclosure.
For best cellular coverage position the antennas in the orientation
shown below (perpendicular to each other).
PRE-INSTALL NETWORK INSTALL ACCESS CONTROL INTRODUCTION
INTRODUCTION PRE-INSTALL NETWORK INSTALL ACCESS CONTROL
INTRODUCTION PRE-INSTALL NETWORK INSTALL ACCESS CONTROL
INTRODUCTION PRE-INSTALL NETWORK INSTALL ACCESS CONTROL
INTRODUCTION PRE-INSTALL NETWORK INSTALL ACCESS CONTROL
INPUT OUTPUT WIEGAND
GATE
SDA SCL
OUTPUT
NO COM NC NO COM NC
1 2
D1 COM D0 D1 COM D0
1 2 WIEGAND
1 GND 2
INPUT
GND 12V-24V
POWER
POWER ETHERNET
7 in. (17.78 cm)
1.3 in. (3.3 cm)