MYPV ESW AC-THOR 9s, Assembly Instructions Manual, Page: 8 / 33

AC•THOR®9s Assembly Instructions, Version 200910 8
4. Safety instructions
• Installation must be carried out by a licensed electrician in
accordance with AS/NZS 3000.
•
For water heating applications compliance with AS/NZS 3500 is
required.
• Do not open the AC•THOR®9s. The device does not contain any
parts that may be repaired by the user.
• Only pure resistive electric loads such as immersion heater
elements, boilers, convectors, heating mats or infrared panels can
be connected to the AC•THOR®9s.
• The loads connected must be suitable for variable supply voltages
between 0-230 V AC (in no circumstances units with electronic
power supply!).
• All connected devices must be operated with phase and neutral
conductor.
•
Never connect 400 V loads without neutral conductor!
Otherwise this may cause damage to the AC•THOR®9s or to the
other loads connected to it.
•
Only the supplied plugs must be used for connection to the
AC•THOR®9s.
• Operation of heating systems incorporating electronic thermostats
is not possible.
• For heating water, only heaters with an integral safety temperature
limiter may be connected.
•
The AC•THOR®9s is designed for fixed installations indoors.
• Comply with the relevant standards when mounting and
connecting the device.
• The AC•THOR®9s housing may heat up during operation. Only
mount the unit on non-combustible surfaces.
•
The AC•THOR®9s is only intended for use in dry rooms indoors.
Otherwise there is a risk of fatal electric shock!
• Installation in rooms with a high level of humidity must comply
with relevant regulations.